Just T4s / Technical Library / Factory engine guide

VW T4 AHY & AXG
2.5 TDI · 151 PS

The high-output 111 kW, five-cylinder diesel engines. Factory figures, the differences between AHY and AXG, and what owners need to check when maintaining or buying parts for a 151 PS T4.

2,461 cc · 5 cylinders111 kW · 151 PS295 Nm1998–2003

The AHY and AXG are the most powerful factory-fitted diesel engines in the Volkswagen T4 range. They share the same rated power and torque, but the later AXG differs in intake and engine-management details. They should not simply be treated as ACV engines with extra power.

Engine identification

AHY vs AXG: the essential specifications

Earlier high-output TDIAHY

Engine family
2.5 TDI · inline-five
Catalogue dates
05/1998–09/2000
Power
111 kW · 151 PS
Torque
295 Nm
Displacement
2,461 cc
Compression ratio
19.5:1
Bore × stroke
81 × 95.5 mm
Later high-output TDIAXG

Engine family
2.5 TDI · inline-five
Catalogue dates
09/2000–06/2003
Power
111 kW · 151 PS
Torque
295 Nm
Displacement
2,461 cc
Compression ratio
19.0:1
Bore × stroke
81 × 95.5 mm

Both develop their quoted peak power at approximately 4,000 rpm and 295 Nm across approximately 1,900–3,000 rpm. The output is commonly advertised as “151 bhp”, but the catalogue figure is 151 PS (about 149 imperial bhp).

Production-date note: The dates above follow Heritage Parts Centre’s engine-code register. Some specialist references list AHY production extending into 2001. For a particular vehicle, confirm the code on its identification sticker or engine and use its VIN rather than guessing from the registration year alone.
What’s different?

More than a higher-output ACV

The 111 kW hardware

Compared with the lower-output ACV, the 111 kW engines use substantially different components, including the variable-geometry turbocharger, larger intercooler, injection equipment and engine management. Parts interchangeability must be confirmed individually.

AHY to AXG

AXG followed AHY and uses revised intake and engine-management arrangements, with changes associated with Euro 3 emissions applications. Do not assume that all turbo, fuel-system, exhaust or ancillary parts transfer directly between AHY and AXG.

Ownership and maintenance

What to check on a 151 PS T4

Service history

  • Identify the exact engine code and match it to the vehicle’s VIN and build sticker.
  • Check documentary evidence for camshaft and injection-pump timing belt work and any associated components.
  • Confirm oil specification, capacity, cooling system details and belt intervals from the correct VW workshop information.
  • Record gearbox code and equipment codes before ordering drivetrain, belt or braking parts.

Investigating running faults

  • Read stored engine fault codes before replacing parts.
  • Inspect vacuum hoses, turbo control, intercooler and charge-air pipework when diagnosing boost or power loss.
  • Check injection timing and sensor readings as appropriate to the symptoms.
  • Remember that a loss of power is not, by itself, proof that the turbocharger has failed.
Parts warning: Many online catalogues combine several T4 2.5 diesels in one listing. The AHY and AXG are 111 kW engines; do not assume an ACV, AJT or generic “2.5 TDI” part is correct without checking the OEM part number, VIN, equipment and engine code.
Use this information across Just T4s

Save the correct code in My T4

Both AHY and AXG are now available as separate choices in your My T4 vehicle profile. That code is used by the Technical Library, the Parts Library and the Fault Finder. Parts recommendations only appear where compatible part records have been properly established.

Reference notes

Sources and verification

Factory engine identification and dated model coverage are supported by Volkswagen Heritage engine-code information. Specification and hardware comparisons are also cross-checked against the independent T4-Wiki technical entry. These sources do not replace model-specific service manuals or a vehicle’s build data.

Technical content checked 19 November 2026. Workshop procedure and maintenance specifications must be verified for the individual vehicle.