THE T4 HANDBOOK

MECHANICAL
& DIY
GUIDES.

Practical Volkswagen T4 workshop guides covering diagnosis, repairs, suspension and owner modifications. Built around the way the T4 actually works, with the aim of helping owners understand the job before reaching for a spanner.

Affiliate advert
Just Kampers
CURRENT MECHANICAL GUIDES

Jobs worth understanding properly

Each guide links to the related diagnosis, parts and follow-on work so you do not end up treating symptoms while the real fault is still underneath the van laughing at you.

GEARBOX & LINKAGE

VW T4 Gear Linkage Problems & Repair

Sloppy gear lever, missing gears or difficult selection? Diagnose worn balls, bushes and support points before blaming the gearbox.

READ THE GEAR LINKAGE GUIDE →

OWNER MODIFICATION

VW T4 Short Shift Mod

Reduce the gear lever throw using the original swivel bracket, with the 35 mm relocation explained step by step.

READ THE SHORT SHIFT GUIDE →

SUSPENSION

How to Lower a Volkswagen T4 Properly

Front torsion bars, rear springs, damper choice, geometry, clearance and the checks that matter once the ride height changes.

READ THE LOWERING GUIDE →

WORKSHOP

The Essential T4 Tool Kit

What belongs in the van, what belongs in the workshop and which tools make common T4 jobs considerably less offensive.

READ THE TOOL KIT GUIDE →

COMING INTO THE WORKSHOP

The next Mechanical & DIY guides

This section will keep growing around the jobs T4 owners actually ask about rather than padding the site with generic car maintenance articles wearing a VW badge.

01

Brakes

Discs, pads, calipers, hoses, ABS faults and practical brake diagnosis.

COMING NEXT

02

Cooling System

Overheating, coolant loss, thermostats, fans, radiators and the common checks before buying parts.

PLANNED

03

Servicing & Maintenance

Routine service jobs, fluids, filters and preventative checks for keeping an ageing T4 dependable.

PLANNED

04

Front Suspension

Ball joints, bushes, steering play, dampers and deciding what is actually worn before replacing half the front end.

PLANNED

Workshop safety: These guides are intended to help owners understand T4 systems and common jobs. Work underneath a vehicle only when it is correctly supported, use the correct tightening data for your specific vehicle, and use a competent workshop where the job is beyond your experience or equipment.